广州车间降温工程电话为你讲诉轴流风机的组成

广州车间降温工程电话为你讲诉轴流风机的组成

今天电话为你分享轴流风机的组成，内容如下：
     普通型轴流风机可用于一般工厂、仓库、办公室、住宅内等场所的通风换气，也可用于冷风机（空气冷却器）、蒸发器、冷凝器、喷雾降、等等，也有矿用轴流风机，
      防腐、防爆型轴流风机采用防腐材料及防爆措施，并匹配防爆电机，可用于输送易爆、易挥发、具有腐蚀性的气体，广州车间降温工程需要要求轴流风机输送的气体应无显著灰尘，无粘性和纤维物质；电动机直连型温度不超过40℃，皮带传动型温度不超过60℃。输送气体的粉尘量不得超过150mg/m3，
    轴流风机主要由叶轮、机壳、电动机等零部件组成，支架采用型钢与机壳风筒连接。方表示其中防腐型轴流风机叶轮、机壳均为玻璃钢制成，其它型式轴流风机一般采用钢板制成。

     工程，承接各种环保空调车间降温工程、负压风机车间降温工程、净化车间降温工程、除尘车间降温工程、消防排烟工程、通风降温设备安装维修工程、厂房车间降温工程、厂房降温工程、厂房通风降温工程等工程，欢迎咨询：***

Today, the Guangzhou workshop to cool down the phone to share the composition of the axial flow fan, the content is as follows:
Ordinary type of axial fan can be used for General Factory, warehouse, office, residential and other places of ventilation, can also be used for air coolers (air cooler), evaporator, condenser, spray down, and so on, there are also used for mining axial fan,
Anti-corrosion, explosion-proof axial flow fan with anticorrosive material and explosion-proof measures, and matching the explosion-proof motor, used for conveying explosive, volatile, corrosive gas, Guangzhou workshop cooling projects need requirements axial flow fan for conveying the gas should be no significant dust, inviscid and fiber material; directly coupled to an electric motor type temperature does not exceed 40 DEG C, belt type transmission temperature does not exceed 60 degrees. Dust of the conveying gas shall not exceed 150mg/m3,
By the impeller, casing, motor and other parts of axial flow fan, using the steel bracket is connected with the casing pipe. Plant cooling engineering construction side said that the anti-corrosion type axial fan impeller, casing are made of glass, other types of axial flow fan is generally made of steel.
Guangzhou plant cooling project, to undertake a variety of environmental protection and air conditioning plant cooling, vacuum blower workshop cooling, cooling engineering, purification workshop, dust removal plant, fire smoke, ventilation cooling equipment installation and maintenance engineering, plant workshop cooling, plant cooling and cooling engineering, etc., welcome advice: ***