广州厂房降温工程公司带你了解环保空调制冷原理分为两部分
，承接各种环保空调车间降温工程、负压风机车间降温工程、净化车间降温工程、除尘车间降温工程、消防排烟工程、通风降温设备安装维修工程、厂房车间降温工程、厂房降温工程、厂房通风降温工程等工程，欢迎咨询：***
今天厂房降温工程公司和你分析环保空调制冷原理分为两部分，如下：
第1、二元溶液在发生器内被热源加热沸腾，产生出制冷剂蒸汽在冷凝器中被冷凝为冷剂液体。液态冷剂经U形管节流后进入蒸发器，经蒸发器在低压条件下喷淋，液态冷剂蒸发，吸收冷媒热量，产生制冷效果。
第2、发生器流出的浓溶液，经热交换器降温、降压后自流进入吸收器，与吸收器原溶液混合成为中间浓度的浓溶液。中间浓度溶液被吸收器泵输送并喷淋，吸收从蒸发器出来的制冷剂蒸汽变为稀溶液。稀溶液由发生器泵送达发生器，重新被热源产生制冷剂蒸汽再次形成浓溶液，进入下一个循环周期。
广州厂房降温工程公司最后指出任何制冷设备都有四大部分组成（压缩机、冷凝器、蒸发器、节流装置），制冷剂在制冷机内通过物理状态变化从而吸收或者释放热量达到制冷或者制热的效果。
Guangzhou plant cooling engineering company, to undertake a variety of environmental protection and air conditioning plant cooling, vacuum blower workshop cooling, cooling engineering, purification workshop, dust removal plant cooling, fire smoke, ventilation cooling equipment installation and maintenance engineering, plant workshop cooling engineering, plant ventilation cooling engineering and other projects, welcome advice: ***
Today, the plant cooling engineering company and your analysis of environmental protection and air conditioning refrigeration principle is divided into two parts, as follows:
The 1, binary solution in the generator is heated boiling, produce the refrigerant steam in the condenser is condensed into liquid refrigerant. Liquid refrigerant by the U shaped pipe throttling after entering the evaporator, the evaporator in under the condition of low pressure spray, liquid refrigerant evaporation, absorb heat from the refrigerant, cooling effect.
Second, generator out of the concentrated solution, through the heat exchanger to cool, Buck after flowing into the absorber, absorber and the original solution mixed become concentrated solution of intermediate concentrations. The middle concentration solution is pump and spray absorber, absorption from the refrigerant vapor into the evaporator of dilute solution. Plant cooling dilute solution by the generator pump delivery generator, the heat generated by the heat of the refrigerant vapor to form a concentrated solution, into the next cycle.
Guangzhou plant cooling engineering company in the last point out that any refrigeration equipment has four parts (compressor, condenser, evaporator, throttle device), refrigerant in the refrigeration machine through the physical state changes in order to absorb or release heat to achieve refrigeration or heating effect.